MG & Rover - XPower Forums banner

1 - 6 of 6 Posts

·
Registered
Joined
·
144 Posts
Discussion Starter #1
hi all, my mates zt td has blown the turbo we need to change it but dont know how to strip everything down to get to it. can anyone point us in the right direction?

thanks dan
 

·
Its a V8 user thing...
Joined
·
2,122 Posts
Its a BMW M47 engine and you go down through the airbox and up past the undertray. Airbox and filter out. Jack up and tray off :)

.....and small strong fingers.
 

·
Registered
Joined
·
144 Posts
Discussion Starter #4
how the hell does the boom of the air box come off? we too the 4 bolts out from inside what else has to be removed?
 

·
Its a V8 user thing...
Joined
·
2,122 Posts
Think there is five bolts not four. Once the top and air filter are out it was fairly straight forward. Always difficult via forum. Sounds like you need to go and buy the Haynes manual ;)
 

·
Registered
Joined
·
144 Posts
Discussion Starter #6
maybe we missed a bolt then. Ye either that or get out the hammer :) ok will have another go
 
1 - 6 of 6 Posts
Top