MG & Rover - XPower Forums banner
1 - 2 of 2 Posts

·
Registered
Joined
·
6 Posts
Discussion Starter · #1 · (Edited)
In process of repairing vis valves and having completed the balance valve it seems impossible to get it to travel more that about 25 deg instead of 90. The total travel of the cam between the micro switches is about 25 deg and I can't see any way of fitting the cam wheel in a position to give 90 deg travel.
I have seen a video here showing the balance valve open and close fully 90 deg.

What am I doing wrong!!

this link to picture
http://sports.webshots.com/photo/2073546810103080326FpleAG

Please help
 

·
Registered nUber
Joined
·
2,259 Posts
In process of repairing vis valves and having completed the balance valve it seems impossible to get it to travel more that about 25 deg instead of 90. The total travel of the cam between the micro switches is about 25 deg and I can't see any way of fitting the cam wheel in a position to give 90 deg travel.
I have seen a video here showing the balance valve open and close fully 90 deg.

What am I doing wrong!!

this link to picture
http://sports.webshots.com/photo/2073546810103080326FpleAG

Please help
Cant remember fro memory but I'm Planning on taking two apart this Sunday and I know one works 100%. Will let you know the outcome and hopefully be able to help then if no one pops up 1st.
 
1 - 2 of 2 Posts
Top