MG & Rover - XPower Forums banner

280bhp mg6?!

2250 Views 5 Replies 5 Participants Last post by  Windy
1 - 6 of 6 Posts
no its a turbo k series on n series? by the look of it
no its a turbo k series on n series? by the look of it
Neither of those; it's the SAIC Kavachi version as is standard in the MG6 - they are stronger.
I'd put money on it not being 280bhp
280 hp from modern 1,8 litres petrol engine won`t make me to raise my eyebrowns, it is so easy to do.
You just change exhaust system to similar like in rally Evo and your rolling road man greate more turbo pressure + new fuel and ignition maps to suit.

Power in turbo engine is very much related to air pressure coming into the cylinder. Good examble is my Ducato. With 1,0 bar its having 122 hp. With 1,4 bar pressure we got 142 hp without any kind of modification. Another good examble is BMW 1500 cc engine which gave with 4,9 bar pressure 1300 hp but with 3,0 bar only 740 hp.

If they say that Roewe had 400 hp or more I would like to know which kind of engine Kavachi really is and how it can cope with that amount of power compared old Rover K. Can`t find any dravings about it.
If they say that Roewe had 400 hp or more I would like to know which kind of engine Kavachi really is and how it can cope with that amount of power compared old Rover K. Can`t find any dravings about it.
The drawings must be almost the same as for the old Rover K but they did remove some of the weeknesses such as the main weekness in the crankshaft. From the image it looks like a bigger turbo has been fitted so I don't see any problem either, making it long term reliable might be more difficult.
1 - 6 of 6 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top